Rapid cleaning of contact lenses in just 3 minutes, contact lens cleanser "MINI" risks and challenges

It's troublesome to maintain contact lenses every day!

People who use contact lenses will have the following troubles because of the maintenance of contact lenses.

If it is 3N MINI contact lens cleaner

All these troubles can be solved, only 3 minutes can be easily maintained, stubborn dirt can also be strongly cleaned and sterilized!

STEP1: wash and sterilize first.

MINI Cleaner first removes protein dirt attached to the lens and removes clogged oxidation permeable pores using innovative electrophoretic separation of ELEPY particles. The core technology of "Electrophoretic Separation of ELEPT" attracts the lens to oxidize the clogged protein dirt in the permeable pores to clean it.

STEP2: replenish water

Then use the ion exchange technology to adjust the osmotic pressure inside and outside the lens to restore the moisture of the lens and restore the moisturizing feeling. The lens is stimulated by micro-current of special frequency, and the osmotic pressure inside and outside the lens is adjusted by ion exchange technology, so that the cleaning / preservation solution permeates into the lens, so that the lens can repair the moisture and reduce the moisture of the original water.

Check the number of bacteria after cleaning with 3N cleaner!

"Electrophoretic separation of ELEPY particles" has a strong disinfection ability, which can remove protein dirt and bacteria from the dirt lens and prevent bacteria from growing.

Not all bacteria have germicidal efficacy.

The inspection report adopts 5-level evaluation, more than 5 is 99.99%, and the effect is the same.

How many times you wash your contact lenses, you will have the feeling of purring. Won't your eyes feel dry?

In fact, the main reason is that protein stains block the oxidation of the lens through the pores, tears can not fully supply water to the lens, and the lens is dry and wears away the cornea.

The electrophoretic separation of MINI detergents developed by patented 3N technology can clean and disinfect protein dirt on contact lenses.

Electrophoretic protein decontamination technology is a struggle between electrochemical technology and protein pollution and bacteria in the invisible micro world. The protein has a negative charge under certain conditions and is attracted to the cleaning needle at both ends of the 3N detergent in the electrophoretic environment, while the bacteria are removed by micro-current and hypochlorite produced by electrolysis.

MINI detergent stimulates the lens with micro-current of special frequency, adjusts the osmotic pressure of the lens with ion exchange technology, makes the cleaning / preservation solution permeate into the lens, replenishes moisture and restores the moisture of the lens.

The MINI Cleaner is designed to be ultra-compact, making it cheaper to carry, despite the concentration of high-tech technology. It weighs less than an egg and even makes people forget to put it in the bag.

MINI cleaning operation is very simple, just click the touch button, only 3 minutes can be fully automatic cleaning.

The MINI cleaner uses the latest power-saving chips and can run for about 30 days on a single charge. In addition, using the international standard Type-C charging method, you can also use portable battery and other simple charging while moving or going out, which can be easily used.

STEP1: insert the attached tweezers into the hole next to the body.

STEP2: one side takes off the clean warehouse and removes it from the body.

After removing the cleaning chamber from the fuselage, it can also be used as a lens storage box and mirror!

In case of emergency such as going out, it can be used to prepare contact lenses or repair makeup.

Use a specially coated skin-friendly material to achieve a delicate and smooth feel, just like touching a baby's skin.

3N technology has been researched and developed in the field of contact lens cleaning for many years, and more than 56 patents have been obtained so far. This MINI cleaner makes full use of the "electrophoretic separation ELEPY cleaning technology" that can only be experienced by 3N, and will creatively subvert the common sense of contact lens cleaning up to now!

Open the cleaning chamber counterclockwise and inject cleaning / preservation solution (cleaning needle) into the cleaning tank. Put the contact lenses into the cleaning tank with tweezers and close the cleaning chamber clockwise. Click the bezel switch to start the automatic cleaning mode, the indicator light is white; after 3 minutes, the light (white) is off, and the cleaning is finished. After rinsing, please gently rinse the lens with detergent / preservation solution before dipping it, or you can store the lens in the washing bin with a new washing / preservation solution.

When using 3N MINI contact lens cleaner, please pay attention to the following

1 after use, it is recommended to wash gently with cleaning / preservation solution before installation.

The reason why direct installation is not recommended after cleaning is that according to the physique of the user, there are also people with sensitive eyes.

We suggest that after cleaning, rinse gently with contact lens cleanser before wearing it.

2 keep the clean body dry

A high humidity environment may lead to metal oxidation and may affect the normal use of detergents.

When using detergent, please remove the cleaning bin from the main body and put it into the cleaning liquid, while keeping the main body and the cleaning bin in a dry state.

September 15, 2020

October 30, 2020

Distribution is expected to begin by the end of November 2020.

q. Can hard contact lenses, color contact lenses, disposable lenses and so on be cleaned? A.3N contact Lens Cleaner (MINI) can be used to clean and disinfect all types of contact lenses, including soft contact lenses, hard contact lenses, color contact lenses and disposable contact lenses (but reuse is not recommended). When cleaning hard contact lenses, it is recommended to clean them twice in 3-minute mode.

q. Can I use the contact lens cleaning / preservation solution on the market? Manufacturers recommend the use of contact lens cleaning solutions with weak cleaning power, such as MPS, which are common on the market. Because this product is equipped with the function of cleaning and sterilizing lenses, hydrogen peroxide and AB liquid cleaning solutions with strong cleaning and disinfection ability are not recommended. Please refer to the instruction manual when using it.

q. How long can the charging time and one charge last? A.A. The charging time is about 30 minutes. Recharge it again and it can be used for about a month.

q. Is it waterproof? A.A. The part of the sink for cleaning is designed to prevent water from entering the machine, but the part of the machine outside the part of the sink is not waterproof, so please be careful not to immerse the body in the water and do not let the water into the charging port.

q. Can only water be used when cleaning? A.A. The use of tap water or water purifier can also remove protein and sterilization, but for more effective cleaning, it is recommended to use contact-specific cleaning solution or salt water.

q. In the cleaning machine, in addition to contact lenses, can you also put earrings and other small items for cleaning? A.A. This product is optimized for contact lenses, please do not use anything other than contact lenses.

Q: how to clean the main body? A: wipe the fuselage and inner groove with a wet wipe or paper towel to keep the fuselage clean and dry.

Q: please tell me about the warranty. A: yes, we offer an one-year warranty.

After the return arrives, the non-artificial quality is bad within 7 days, the new product can be replaced free of charge. The freight during the replacement shall be borne by our company. After the arrival of the return, the non-artificial quality within 30 days can be replaced, but it is non-refundable. The freight at the time of replacement is borne by the guest. In the process of use, artificial poor quality will require maintenance costs. The freight for replacement and repair within 1 year after 30 days will be borne by the customer.

3N Technology is a high-tech company specializing in R & D, production and sales of technology, mainly manufacturing and selling contact lens care products. 3N has been committed to the research and development of contact lens care products for many years and has been recognized as a national advanced technology enterprise in China. So far, 56 patented technologies have been obtained, and several innovative technologies of contact lens care products have been successfully studied, developed and applied. In many product lines, contact lens cleaners using "electrophoretic separation ELEPY cleaning technology" have been highly praised.

Is the project drafter DADA Co., Ltd.

Our company is an enterprise with the goal of "a society without waste and sustainable development".

Launched a completely free system of Frimer App "Ageru Frima" and EC store "AGERU strict selection".

In the EC store "AGERU strict selection", we will discover overseas excellent products and introduce them to all of you in Japan. At the same time, we will also help manufacturers enter the Japanese market. This time, as a regular Japanese agent of 3N technology, such as contact lens care products, which integrates research, development and manufacturing, the product information of contact lens cleaner "MINI" is published on GREEN FUNDING. Initial bad replacement, commodity guarantee, after-sales service after purchase will also be foolproof, please rest assured to use.

In the future, we will strictly select the "good products" in the world and pass them on to you. Thank you for your support.

Returns and refunds related to the sense of use can not be accepted.

With regard to products under development, there is also the possibility of partial changes in design specifications. If you have more support than expected, shipping time may be delayed due to convenience in the manufacturing process.

"with the support of more people than expected through this project, and with the further adjustment of the mass production system from the ongoing environment, the formal sales price is also likely to be lower than the sales predetermined price.

* parallel imports may occur. Please understand that individual imports and sales may not be able to prevent this.

This project is All or Nothing (post-achievement support). It can only be sent back if the goal is achieved, please support it.

In terms of the nature of crowdfunding, please take care of the above points on the basis of prior understanding and understanding.