The sharpness of the T -shaped razor blade is revived!The blade cleaner "nanofix" that makes it many times longer is being implemented in the crowdfunding "Makuake"

Nanofix-main

NANOFIX is an eco-friendly product developed to keep the disposable razor blades of T-shaped shavers clean and keep them sharp for a long time. T-shaver razors generally cannot be cleaned under running water after shaving to remove impurities on the razor blade. NANOFIX thoroughly removes shavings from shaved beards and sebum stains on blades that cannot be removed with normal water washing.

​

​

Have you ever experienced something like this?

●Beard is caught and cannot shave well. I have rough skin after shaving. ●I cut my skin by shaving because I didn't have a spare blade. ●Replacement blades are expensive, so I don't replace them often ●I forget to buy replacement blades Not only men's T-shaped shavers, but also women's T-shaped razors have the same troubles.

There are individual differences in the thickness and hardness of the beard, how to shave, and the frequency of use, but in general, we recommend replacing the blade as the sharpness will decrease after about two weeks. Also, if you use a brush to remove beard debris stuck between the blades, it will damage the blade and make it extremely dull.

The annual cost of replacement blades is also a problem, but if the sharpness drops, you will get scratches and troubles on your face, which will make you feel uncomfortable.

Main Features of NANOFIX

Why Use Cleaner?

After using the shaver for a certain period of time, the scars and troubles on the face are caused by the razor blade rather than the razor blade wear. It's because of impurities. Washing under running water after shaving generally does not remove impurities from the blades.

These impurities stick to the blade and cause a poor shave and rough skin. Therefore, it is important to keep the razor clean at all times, just like electric shavers have a cleaning function. Unlike the material used in conventional cleaners, the NANO PU sheet is made of polyurethane-coated silicone with nano-sized holes on the surface.

NANO PU sheet

The adsorption function of the nano PU sheet firmly removes impurities. After lightly pressing the shaver, slide it upwards to remove foreign matter from the shaver blade that has been absorbed by the nano PU sheet.

When used in a washbasin, etc.

When using on the wall in the bathroom

How does the

cleaner work?

After using the NANOFIX Cleaner once every 3-4 days and using it 60 times for 2 months, the razor blades are maintained to some extent even when compared to new ones. And there is almost no damage to the razor blade.

After 60 uses while cleaning with NANOFIX

We used a microscope to take pictures of the used and dull replacement blades that were scheduled to be discarded before and after using NANOFIX to check the condition and verify the sharpness after use.

Verified with an electron microscope

Used for 2 weeks (never used NANOFIX)

A disposable replacement blade that looks beautiful to the naked eye, but is dull and will be discarded after about 2 weeks of use.

After cleaning with NANOFIX

Here is an image of a used razor after cleaning with NANOFIX.

Simply rub the blade against the NANO PU material to cleanly remove dirt. When I tried shaving with the replacement blade razor after using the NANOFIX cleaner, it was difficult to shave due to catching. increase.

According to our internal staff with thick beards, before using NANOFIX, the replacement blades were discarded after about two weeks, but after using NANOFIX, they lasted for about a month. rice field. This varies from person to person depending on the thickness of the beard and frequency of use. NANOFIX defines it to last up to 5 times longer depending on how often you use it.

How to use

After opening, lightly wet the main unit and the NANO PU sheet with water, and attach the sheet to the main unit. Install

How to use Step 1

Step 11. Put makeup gel/soap foam/shampoo rinse etc on the surface. * It is OK as long as the razor blade can slide smoothly. Note: Do not use shaving foam as it interferes with the adsorption function of the NANO PU sheet.

How to use Step 2

Step 2 Spread the foam or gel over the entire surface of the NANO PU, lightly press the shaver and slide it from the bottom to the top as if you were rubbing the blade against the shaver. Repeat this action about 5 times. Note: Slide in the direction opposite to when shaving.

How to use Step 3

Step 3 After use, rinse with water and dry the shaver well.

Mechanism of NANOFIX

Mechanism of NANOFIX 1

Gently press the shaver and slide it up about 5 times to remove dirt!

How NANOFIX Works 2

Product details

Color variations

Product name: T-shaped razor blade cleaner “NANOFIX” Color: White, Black Scheduled general sale price: 2,420 yen

Material / Body: ABS resin, Sheet / NANNO PU Country of origin: Made in China Package contents: Body x 1, NANO PU sheet x 2, 3M wall sticker x 1 Makuake Project (https://www. makuake.com/project/nanofix/ ) Implementation period: Until 2021/06/29 23:59 Support purchase price return for supporters Please see the project page above for details.

[Updated] CAMPFIRE encore campaign (https://camp-fire.jp/projects/view/414460) Implementation period: Until 2021/07/30 23:59 Support purchase price return details for supporters are above Please see the project page. [Contact for inquiries regarding this matter] Listyc Co., Ltd. https://listyc.com Contact: 050-1024-6760