High-end routers in the 40,000 yen range are extremely rich in functionality and performance! The 10GbE + powerful antenna wasn't Date!

Even with Wi-Fi 6, if the WAN is 1 Gbps, it is a treasure-troubled 10 GbE x 2 mesh compatible, and one that is too full of functions

Supports Wi-Fi 6 and achieves a maximum communication speed of 4804 Mbps in the 5 GHz band

RT-AX89X with 8 antennas

Equipped with 2 ports of WAN / LAN and SFP + for 10GbE

Of the three ports visible in the center of the photo, the WAN port that supports 1GbE from the left, the WAN / LAN port that supports 10GbE, and the SFP + port.

If you connect the conversion connector LAN cable required to connect a 10GBASE-T device to SFP +, it will look like this.

Eight 1GbE LAN ports can be up to 2Gbps with LAG

<8 LAN ports of 1GbE are prepared, and 2 of them (LAN1 and LAN2 only) also support LAG (Link Aggregation). This is also a nice feature to improve the existing environment. For example, even if you change the router to 10GbE, it may be difficult to suddenly replace the peripheral network devices with 10GbE. However, if you use LAG, you can bundle two 1GbE to a maximum of 2Gbps. If the existing device supports LAG, the speed can be increased immediately.

ASUS original mesh Wi-Fi function "AiMesh"

Although Wi-Fi 6 is high speed, it is basically not something that the range of radio waves is wider than before

Equipped with a USB port that can be used for file sharing and backup

By connecting an HDD etc. to the USB port, it can also be operated as a simple NAS