IPv6 support for SMEs / stores with Japan Network Enabler "Aterm Biz SH Series" and "v6 Plus"

Main body of NEC Platforms "Aterm Biz SH621 A1"

Wi-Fi 6 and mesh relay compatible, features suitable for SOHO offices and stores

Aterm Biz SH Web GUI (Quick Setting Web).It features "easy setting" with an easy-to-understand setting screen.

Efficient remote management with support for cloud management service "NetMeister"

Dashboard screen of cloud management service "NetMeister". You can visualize and manage the operating status and inventory information of network devices such as Aterm Biz SH.

NetMeister function setting on the Aterm Biz SH side.All you have to do is set the group ID, password, and installation base name.

With NetMeister, you can check various information for each base / device. In the case of Aterm Biz SH, you can also check the signal strength of the connected device.

IPv6 / v6 plus line is automatically determined, almost no user settings are required

Step 1: Just set to "v6 Plus Mode" even if you are manual

"Basic settings" screen. You can set the connection to the v6 plus line just by setting the "operation mode" to "v6 plus".

Check "Connection status" on the "Current status" screen.It was also confirmed that IPv6 / IPv4 addresses were assigned.

Step 3: Automatically execute IPv6 address allocation in the LAN

Let's check the security function

*

(Courtesy of Japan Network Enabler)